| Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer |
|---|---|
| Output Type: | Triple |
| Principle of Work: | Vector Control Transducer |
| Samples: |
Carton Packing
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier SANYU SY8000 Series Frequency Inverter Frequency Converter Drives VFD VSD
High Performance Control Inverter
SY8000 series inverter is a nre generation of high performance vector inverter that is developed by SANYU , representing the future development trend.
SY8000 series inverte is a vector control general inverter that is independently research ,developed and produced by SANYU ,with the features of high quality ,multi applications ,large low frequency torque ,ultra silencing ,ect. It realizes the fast response of torque , strong load adatability ,stable operation ,high accuracy , perfect reliability ,and improve the power factor and efficiency to the largest extent.
1.The contorl mode is varios ,and it is commoonly used .
2.The motoe parameters can be automatically recognized .
3.When the frequency is 0.5Hz, the torque output will be 150%.
4.Zero speed torque output.
5.Super-silent running.
6.Trip suppression to achieve more stable running .
7.The quick menu design.
| SY8000 AC DRIVE/VFDDATASHEET | ||
| Item | description | |
| Rated voltage, frequency | Single phase,220V,50Hz/60Hz; 3 phase, 380V,50Hz/60Hz | |
| input | Allowed fluctuation | Continuous voltage fluctuation:within±10%, instant voltage fluctuation: within -15%10%; voltage imbalance: <3%; frequency fluctuation: within 5%. |
| output | Voltage | Single phase,220V & 3 phase,380V |
| Output frequency | 0~600Hz. | |
| Overload capability | 150% rated current,1 minutes; 180% rated current,1 seconds | |
| control trait | Command input mode | By LCD keypad, by terminals, by PC through serial communication port. |
| Control mode | Open loop vector control, V/F control. | |
| Speed setting method | By keypad, by analog, by PC through serial communication port | |
| Speed setting precision | Digital command±0.01%(-10 +40) | |
| analog command±0.1%(25°C±10) | ||
| Speed setting resolution | Digital command:0.01Hz; analog command:0.1% of maximum frequency | |
| Speed control accuracy | Open loop vector control: ±0.5%; (25°C±10) | |
| Speed regulation range | Open loop vector control: 1:100 | |
| Torque control response | Open loop vector control:<200ms. | |
| Start torque | Open loop vector control:150% of rated torque at 0.5Hz. | |
| Torque control accuracy | ±5% | |
| Set reference voltage supply output | 1 port, +10V, 5mA | |
| Control voltage supply output | 24V,100mA | |
| Analogy input | 2 terminal, No.4 terminal is use for voltage, No. 5 is used for voltage and current input | |
| Analog meter output | 1 terminal, 0/4~20mA or 0~10V available for it | |
| DO frequency signal output | 1 port, high-frequency signal output(programmable) | |
| Collector open-loop output | One terminal | |
| Programmable relay output | contactor capacity: 250V AC/3A or 30V DC/1A | |
| Serial communication port | RS-485 connector RS485+,RS485- | |
| 4 bits LED display | setting frequency, output frequency, output voltage, output current, motor speed, output torque, switch value terminal, programming menu parameters and fault code. | |
| Five indication lamp | Parameter unit, RUN/STOP status, special status, charging status. | |
| Protection function | Protection function | Over voltage, under voltage, current limitation, over current, overload of inverter, overload of motor, overheat, overvoltage stallout, load short circuit, phase fault. |
| Protection degree | IP21 | |
| Cooling mode | Forced air cooling | |
| environment | Ambient temperature | -10°C,+40°C |
| Temperature | 2090% RH(no condensation) | |
| Storage temperature | -20°C,+ 60°C | |
| Application area | indoor(no corrosive odor, dust) | |
| Installation area | Altitude is not more than 1000meter, no dust, no corrosive oder, no direct sunlight. | |
| Vibration | less than5.9m/ S 2 | |
| Model | Input Voltage | Power(KW) | Rated Input Current(A) | Rated Ouput Current (A) |
| SY8000-0R7G-2 | 3 PH 220V | 0.75 | 5.0 | 4.5 |
| SY8000-1R5G-2 | 1.5 | 7.7 | 7.0 | |
| SY8000-2R2G-2 | 2.2 | 11 | 10 | |
| SY8000-0R7G-4 | 3 PH 380V | 0.75 | 3.4 | 2.5 |
| SY8000-1R5G-4 | 1.5 | 5.0 | 3.7 | |
| SY8000-2R2G-4 | 2.2 | 5.8 | 5.0 | |
| SY8000-004G/5R5P-4 | 4.0/5.5 | 1.0/15.0 | 9.0/13.0 |
SANYU is one of leading manufacturers of inverters, soft starters, and transmission control automation products in Shanghai, China.
SANYU has more than 20 years of automation equipment manufacturing history, and its products have CE, SGS, CCC, ISO9001-2015 and other quality certification certificates. Sanyu products have been exported to more than 50 countries all over the world . There are more than 20 sales and service branches in USA, Europe ,South East Asia , Middle East Asia , South America, Africa and so on .
SANYU has a strong R&D team composed of PhDs and masters, and will regularly launch new products with leading levels every year to continuously satisfy customers' application experience.
1.Carton or Wooden Packing
2.Delivery : By sea , by air , by express and so on
1. Factory or trade company only? What certifications do you get?
A: We are factory absolutely. And we have CE, ISO9001, SGS, CCC.
Q2. Can I be your sale agent in our market?
A: Why not, welcome. Email me now if you are interested.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}